FSL 3D Haunted House

It is a 3D spooky halloween house.

This design will amaze your children, grandchildren and friends with this Spooky House.

The best part is no other sewing is required as the assembly is completed with the buttons and loops.

1. Fat quarter (18” x 22”) of purple Kona Cloth
2. Small square approximately 9” x 9” of Glittered yellow organza
3. 3.5” x 1.5” scrap of orange quilting weight fabric
4. 6” x 18” of roof fabric sample was made with a RJF print collection titled “A Haunting We Will Go”
5. 2.75 yards of water soluble stabilizer
6. ¾ yard of fusible craft interfacing – Pellon 808 Craft Fuse was used in the sample
7. Prewound Black Bobbins
8. Prewound White Bobbins
9. Polyester embroidered thread per color charts. Rayon thread is not advised for the FSL portions of the project.
10. 5” x 7” embroidery Hoop
11. Spray Adhesive
12. Two flameless tea lights
13. Spray Adhesive
14. Pointed splinter tweezers to assist in assembling the house
15. Size 6 knitting needle to slightly stretch loops

1. Rayon thread is not advisable for the FSL portions of the project.
2. This project pack requires 10 Hour(s) to complete.